Product

Product Description

How to Use the Coax Compression Tool (Universal) 490181

Preparation

1. Gather the necessary materials: the Coax Compression Tool, the coaxial cable you wish to terminate, and a clean, flat work surface.
2. Ensure that the coaxial cable is the correct size for the tool (typically RG-6 or RG-59).

Stripping the Cable

1. Carefully remove the outer jacket of the coaxial cable, exposing the braided shield and the inner conductor.
2. Use the appropriate stripping tool or a utility knife to carefully remove the braided shield, leaving behind the inner conductor and dielectric.
3. Trim the inner conductor to the specified length, as indicated by the compression tool’s instructions.

Inserting the Cable

1. Insert the prepared coaxial cable into the compression tool, ensuring that the inner conductor and dielectric are properly aligned.
2. Make sure the cable is fully inserted and seated in the tool.

Compressing the Connector

1. Squeeze the handles of the compression tool firmly and completely to engage the compression mechanism.
2. Release the handles and remove the cable from the tool.

Inspecting the Connector

1. Visually inspect the compressed connector to ensure that it is properly seated and that the cable is securely attached.
2. If the connector appears to be misaligned or not properly compressed, repeat the process with a new cable and connector.

Remember to always follow the manufacturer’s instructions and safety guidelines when using the Coax Compression Tool (Universal) 490181. If you have any further questions or concerns, consult a professional or the tool’s manufacturer for assistance.