Product

Product Description

How to Use: Wall Mounting Bracket for Dome Cameras

Preparation

1. Gather the necessary tools: drill, drill bits, screwdriver, level, and a pencil.
2. Determine the desired location for the wall mount and ensure there are no obstructions behind the wall.

Installation

1. Use the provided template or the wall mount itself to mark the drilling locations on the wall.
2. Drill the necessary holes at the marked locations.
3. Insert the wall anchors (if required) into the drilled holes.
4. Secure the wall mount to the wall using the provided screws and tighten them firmly.
5. Ensure the wall mount is level and properly aligned.

Attaching the Dome Camera

1. Carefully place the dome camera onto the wall mount.
2. Align the camera with the mounting holes on the wall mount.
3. Secure the camera to the wall mount using the provided screws.
4. Adjust the camera’s position and tilt as needed to achieve the desired viewing angle.

Connecting the Camera

1. Connect the camera’s power and video/data cables to the appropriate power source and recording device.
2. Ensure all connections are secure and properly routed.

Final Adjustments

1. Power on the camera and verify its operation.
2. Fine-tune the camera’s position and tilt as needed to optimize the viewing angle.
3. Secure any loose cables or wires to maintain a tidy installation.

Remember to consult the manufacturer’s instructions for any specific installation guidelines or requirements for your dome camera model.